AeroUp Man Page

SYNOPSIS
       aeroup  [-t  serialPort]  [-o  serialPort]  [-c red,green,blue,serialPort] [-G
       serialPort] [-S serialNumber,serialPort] [-i gloFile] [-u  gloFile,serialPort]
       [-k serialPort] [-U glocFile,serialPort] [-P] [-v] [-h]

DESCRIPTION
       AeroUp  is  an open source command line tool to control Ultimate (programmable
       light sequencing juggling props) from Aerotech Projects.

OPTIONS
       -t, --test=serialPort
              Send a test command on dev serialPort.

       -o, --start=serialPort
              Send a start sequence command on dev serialPort.

       -c, --color=red,green,blue,serialPort
              Send a color command on dev serialPort.
              Colors red, green, blue can be hexadecimal or decimal value in range of [0-255]
              hex value have to begin with 0x.

       -G, --getSerial=serialPort
              get serial number on dev serialPort, and print it to standard output.

       -S, --setSerial=serialNumber,serialPort
              Set serialNumber on dev serialPort.
              32 bits value can be writen in hexadecimal (0x#) or decimal (#).

       -i, --verify=gloFile
              Verify that syntax glo file is valid

       -u, --uploadGlo=gloFile,serialPort
              Verify that syntax glo file is valid and if this is the case upload  it
              on dev serialPort

       -k --symlink=serialPort
              return the serial name used as symlink of kernel name by udev (work with linux only). see the improved management driver section below.
              But you can also use this command to retrieve an more readable id than serial number.

                Props | Range adress  | id char | Symlinks
              ================================================
                Ball  | 0.0.98.0/24   | b       | /dev/Ball#
                Staff | 0.0.115.0/24  | s       | /dev/Staff#
                Club  | 0.0.99.0/24   | c       | /dev/Club#
                Poi   | 0:0:112:0/24  | p       | /Poi/Poi#
              ================================================

       -P, --thread
              Multithread mode, not implemented yet...

       -U, --uploadGloc=glocFile,serialPort
              not implemented yet...

       -v     Verbose mode

       -h, --help
              Print help

       --version
              Print version

       The last bootloader V2.3 from Aerotech needs to be installed first to use Serial number features.
       Each sub options have to be separate with a comma without blank.

EXAMPLES
       aeroup -t /dev/ttyACM0
       aeroup -o /dev/ttyACM0 -o /dev/ttyACM1 -t /dev/ttyACM3
       aeroup -c 255,69,255,/dev/ttyACM0 27,3,7,/dev/ttyACM1
       aeroup -S 0x0b01/dev/ttyACM0
       aeroup -G /dev/ttyACM0

SEE ALSO
       AeroUp project page : https://github.com/LaurentBa/AeroUp
       AeroWrite project page : https://github.com/LaurentBa/AeroWrite

AUTHOR
       Written by Laurent Barattero (laurent@larueluberlu.net.in)

COPYRIGHT
       Copyright © 2013 BARATTERO Laurent License GPLv3+: GNU GPL  version 3 or later