SYNOPSIS
aeroup [-t serialPort] [-o serialPort] [-c red,green,blue,serialPort] [-G serialPort] [-S serialNumber,serialPort] [-i gloFile] [-u gloFile,serialPort] [-U gloc‐
File,serialPort] [-v] [-P]
DESCRIPTION
AeroUp is an open source tool to use with Ultimate (programmable light sequencing juggling props) from Aerotech Projects.
OPTIONS
-t, --test=serialPort
Send a test command on dev serialPort.
-o, --start=serialPort
Send a start sequence command on dev serialPort.
-c, --color=red,green,blue,serialPort
Send a color command on dev serialPort.
Each sub options have to be separate with a comma without blank.
Colors red, green, blue can be hexadecimal or decimal value in range of [0-255]
hex value have to begin with 0x.
-G, --getSerial=serialPort
get serial number on dev serialPort, and print it to standard output.
-S, --setSerial=serialNumber,serialPort
Set serialNumber on dev serialPort.
32 bits value can be writen in hexadecimal (0x#) binary (0b#) or decimal (#).
-i, --verify=gloFile
Verify that syntax glo file is valid
-u, --verify=gloFile,serialPort
Verify that syntax glo file is valid and if this is the case upload it on dev serialPort
-P, --thread
Multithread mode, not implemented yet...
-u, --verify=glocFile,serialPort
not implemented yet...
aeroup -c 255,69,255,/dev/ttyACM0 27,3,7,/dev/ttyACM1
aeroup -S 0x0b01/dev/ttyACM0
aeroup -G /dev/ttyACM0
SEE ALSO
AeroUp project page : https://github.com/LaurentBa/AeroUp
AeroWrite project page : https://github.com/LaurentBa/AeroWrite
BUGS
No known bugs.
AUTHOR
Laurent Barattero (laurent@larueluberlu.net.in)
0.8 December 2013 man(1)
Man(1) output converted with
man2html