1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
|
<HTML>
<HEAD>
<TITLE>AeroUp Man Page</TITLE>
</HEAD>
<BODY>
<H1>AeroUp Man Page</H1>
<HR>
<PRE>
<!-- Manpage converted by man2html 3.0.1 -->
SYNOPSIS
aeroup [-t serialPort] [-o serialPort] [-c red,green,blue,serialPort] [-G
serialPort] [-S serialNumber,serialPort] [-i gloFile] [-u gloFile,serialPort]
[-U glocFile,serialPort] [-P] [-v] [-h]
DESCRIPTION
AeroUp is an open source command line tool to control Ultimate (programmable
light sequencing juggling props) from Aerotech Projects.
OPTIONS
-t, --test=serialPort
Send a test command on dev serialPort.
-o, --start=serialPort
Send a start sequence command on dev serialPort.
-c, --color=red,green,blue,serialPort
Send a color command on dev serialPort.
Colors red, green, blue can be hexadecimal or decimal value in range of [0-255]
hex value have to begin with 0x.
-G, --getSerial=serialPort
get serial number on dev serialPort, and print it to standard output.
-S, --setSerial=serialNumber,serialPort
Set serialNumber on dev serialPort.
32 bits value can be writen in hexadecimal (0x#) or decimal (#).
-i, --verify=gloFile
Verify that syntax glo file is valid
-u, --uploadGlo=gloFile,serialPort
Verify that syntax glo file is valid and if this is the case upload it
on dev serialPort
-k --symlink
return the serial name used as symlink of kernel name by udev (work
with linux only). see the improved management driver section below.
But you can also use this command to retrieve an more readable id than
================================================
Props | Range adress | id char | Symlinks
================================================
Ball | 0.0.98.0/24 | b | /dev/Ball#
Staff | 0.0.115.0/24 | s | /dev/Staff#
Club | 0.0.99.0/24 | c | /dev/Club#
Poi | 0:0:112:0/24 | p | /Poi/Poi#
================================================
-P, --thread
Multithread mode, not implemented yet...
-U, --uploadGloc=glocFile,serialPort
not implemented yet...
-v Verbose mode
-h, --help
Print help
--version
Print version
The last bootloader V2.3 from Aerotech needs to be installed first to use Serial number features.
Each sub options have to be separate with a comma without blank.
EXAMPLES
aeroup -t /dev/ttyACM0
aeroup -o /dev/ttyACM0 -o /dev/ttyACM1 -t /dev/ttyACM3
aeroup -c 255,69,255,/dev/ttyACM0 27,3,7,/dev/ttyACM1
aeroup -S 0x0b01/dev/ttyACM0
aeroup -G /dev/ttyACM0
SEE ALSO
AeroUp project page : https://github.com/LaurentBa/AeroUp
AeroWrite project page : https://github.com/LaurentBa/AeroWrite
AUTHOR
Written by Laurent Barattero (laurent@larueluberlu.net.in)
0.8 December 2013 <B>man(1)</B>
</PRE>
<HR>
<ADDRESS>
Man(1) output converted with
<a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a>
</ADDRESS>
</BODY>
</HTML>
|
